Gives continuous on-line reports of operating status. Features three levels of ankle-boost sensitivity. Gives uniform coverage from archway to floor. Uses computerized access codes for tamper-proof settings. Is designed for quick and easy assembly. Minimizes false alarms by reducing noise. Improved Detection Performance... Microprocessors in both detection and control circuitry Greater sensitivity for detecting weapons Precise target evaluation Uniform coverage from archway to floor Noise reduction to prevent false alarms Increased Operating Flexibility..... Touchpads and LCD for greater ease and clarity Precise control of program/sensitivity settings Continuous on-line reports of operating status Tamper-proof settings through computerized access codes Simplified method for achieving optimum settings Proven Reliability, Quality, and Value... Meets latest requirements of FAA and other regulatory bodies Complete and automatic self-diagnostic program Rugged, yet designed for easy and quick assembly Optional battery pack, for use anywhere State-of-the-art manufacturing technology Plus .... Proven dependability for over 25 years |
|
| CS5000 Operating CharacteristicsRegulating and Operating Displays : LCD Display: Large alpha/numeric display on the Control Panel reports (in words) all regulating, controlling and self-prompting functions of the unit. Self-Prompting: Because the unit is designed to be "user-friendly," all regulation and control functions are self-prompting with necessary commands shown on the LCD display. Ready Light: This green light appears when full power has been turned on and the unit is ready to detect. The light will also Indicate when an individual inspection has been completed by the unit and it is ready to accept the next Person. Alarm Light: This red light appears when the unit detects a target amount of metal on an individual, according to specifications of the Program and Sensitivity levels. This light will appear even when sound volume has been turned off. Bar Graph: This LED display indicates the detection intensity which is based on the amount and composition of metallic objects passing through the unit. Eight touchpads on the Control Panel below the LCD display on the archway perform all control functions. Standby: When this touchpad is pressed, the unit goes into a low power mode, ready to be returned to full operation instantly when the OPERATE pad is touched. Operate: When this touchpad is pressed, full detection power of the unit is turned on. It also initiates an automatic and comprehensive self-test and diagnostic program for instant fault detection. Touching this pad at any time activates the testing procedure. If faults are found, they will be immediately reported on the LCD display. Counter: When this touchpad is pressed, the current traffic count for the unit is shown on the LCD display. Pressing and holding this touchpad for ten (10) seconds causes the counter to return to zero (O). Volume: When this touchpad is pressed, the volume level of the unit's audio alarm will be displayed on the LCD display. By using the + and - touchpads, operators can raise or lower the volume. + and -: These touchpads will be used to increase or decrease various numerical settings and for certain On/Off functions. Program: When this touchpad is pressed, the settings for Program and Sensitivity will appear on the LCD display. PROGRAMS: Although different settings are required for different applications, the manufacturer finds Program D most effective for high volume high security: Program A for low volume maximum security: and Program 9 in loss prevention situations and in cases where noise problems limit performance of custom programs. It is the responsibility of the user to select and implement that program which is best suited to a particular situation. Programs 1-10: Standard programs designed to detecto a broad range of objects. Lower numbered programs are primarily for the detection of ferrous objects such as iron, most stainless steel, etc. High numbered programs are primarily for the detection of conductive objects such as those made of aluminum, zinc, lead, etc. Programs 7-9 provide a balanced response to ferrous and conductive objects. Program 9 provides good discrimination against foils (cigarette packs, etc.) Immunity to external noise is good, making these programs useful in noisy environments. Overall discrimination is poor. Recommended applications include loss prevention and installations where specific objects need to be emphasized or ignored. Programs 11-15: Standard programs designed to detect a broad range of objects.Lower numbered programs are primarily for the detection of ferrous objects such as iron, most stainless steel, etc. High numbered programs are primarily for the detection of large conductive objects such as those made of aluminum, zinc, lead, etc. Programs 14 and 15 provide a balanced response to ferrous and conductive objects. Immunity to external noise is poor, making these programs difficult to use in noisy environments. Overall discrimination is moderate. Recommended applications include loss prevention and installations where specific objects need to be emphasized or ignored. Program A: Custom program designed to detect the broadest range of objects.Emphasis of detectin is on conductive objects. This program provides the highest level of security available in the CS 5000.Immunity to external noise is moderate, making this program usable in most environments. Overall discrimination is poor. Recommended applications include prisons and other installations where volume requirements allow thorough inspection of each individual. Program B: Custom program designed to detect ferrous and conductive objects equally. Immunity to external noise is moderate, making this program usable in most environments. Discrimination is moderate. Recommended applications include general security. Program C: Custom program designed to detecto ferrous and conductive objects equally. This program is optimized for the three-gun test of the Federal Aviation Administration. Immunity to external noise is moderat, making this program usable in most environments. Discrimination is good, providing the highest throughput rate. Recommended applications include airports, schools, courtrooms, and other high volume installations. Program D: Custom program designed to detecto ferrous and conductive objects. This program provides a level of security that exceeds FAA requirements. Discrimination is moderate to good. Recommended application include airports, schools, courtrooms, and other installations requiring the maximum possible in high volume operation. Program E: Custom program designed to detecto ferrous and conductive objects. Emphasis of detection is on conductive objects. Immunity to external noise is moderate, making this program usable in most environments. Discrimination is moderate to good. Recommended application include loss prevention. -------------------------------------------------------------------------------- All of the above touchpad functions are available to operators of the detector. Access: This touchpad will be used only by supervisory management personnel. It permits changing the Program and Sensitivity codes and also is used to control such functions as synchronization of multiple units, pulse frequency and tone. The unit further protects security of control settings by maintaining a non-resettable sequence code that indicates any attempt at seeking access to the settings. A tamper alarm sounds within 10 seconds after the Access touchpad is pressed unless a proper access code is entered. Technical Specifications Program levels: Ultimate versatility, 20 standard programs plus additional custom programs optimized for specific applications. Sensitivity 1-200 per program for precise target selection. Electronics: Digital-controlled pulse induction metal detector with microprocessors utilized in both detection and control circuitry. Designed for tailoring specific programs to fulfill various security applications. Electronics are modular and designed for easy plug-in and change. Memory: All program selections and settings are maintained in electrically erasable non-volatile memory. The unit win maintain all settings even when disconnected from power. No battery is required for memory retention. Overhead control unit: LCD Display, LED bar graph and control touchpad plus all wiring, connections and electronics are integrated in a single overhead compartment; eliminates exposed wires and external control box. Control outputs: Solid state switches (low voltage AC or DC) for operating external alarms and control devices. Indicators: Ready light indicates unit is operational: Alarm light and audible alarm are activated when target amount of metal is detected; LED bar graph indicates amplitude of alarm signal. Traffic counter: Built-in and resettable with current reading easily available on LCD panel. Tamperproof: Dual-level access codes required to set or change all sensitivity settings and detection programs; one level for use by supervisors in selecting programs and sensitivity and the other for initial set-up and overall control; non-resettable sequence code logs all changes made whenever sensitivity codes are accessed. Audible alarm reports any unauthorized attempt at access. Construction: Attractive scratch- and mar-resistant laminate with resilient end caps; control panel and cross pieces of heavy duty aluminum. Regulatory standards: Meets (or exceeds) all 1991 Federal Aviation Administration airport applications specifications as well as all requirements of National Institute of Law Enforcement and Criminal Justice (NILECJ) standard 0601.00, security levels 1-5. Infrared sensor: Improves analysis of detection signal; increases throughput; helps eliminate "false alarms," also provide accurate traffic counter. Interference rejection: 100% sensor coil Faraday shielding; special Garrett built-in circuitry for noise suppression and ignoring x-ray monitor horizontal sync. Synchronization: Multiple frequencies permit several Magnascanners to operate simultaneously in close proximity. Electrical: Fully automatic 85 to 265 VAC, 50 or 60 Hertz, 5 watts; no rewiring, switching or adjustments required. Power supply meets UL, CSA, TUV, and VDE Standards. Operating temperatures: -4F (-20C) to + 158F (70C) Humidity: To 95% noncondensing. Throughput rate: Not limited by electronics; 50-60 detections per minute is reasonable. Optional features: 2225700 Battery back-up-allows up to 20 hrs. use with quick recharge capability 2225600 Remote Control Console-allows remote operation up to 50 feet. Weight: Approximately 99 Pounds (45 kg). Warranty: 24 months. Parts and labor. Model: 1167400 Dimensions; Passageway interior: Width 30" (0.76 m) Height 80" (2 m) Depth 23" (0.57 m) Overall exterior: Width 35" (0.9 m) Height 87" (2.2 m) Depth 23" (0.57 m) Shipping: Width 33.5" (85.1 Cm) Height 91.5" (223.4 Cm) Depth 6.25" (15.9 Cm) Weight 129 lbs. (58.6 Kg) |
|
| SECURE ONLINE ORDERING. NO SALES TAX (except for Indiana residents) EMAIL US AT: sales2@discountdetector.com PHONE: 765-866-0320 FAX 765-866-0974 Discount Detector Sales 7488 South 600 West Crawfordsville, IN 47933 |